connect@howdiyworld.com
|

IOT based Greenhouse Monitoring System using Raspberry Pi

What is Needed?

GSM Module
Moisture Sensor
Relay 5V
Motor
Jumpers
HowDIY

BLOCK DIAGRAM

Procedure

  1. GSM Module,Relay,Moisture Sensor
  2. Connection
  3. Get in Touch with Leaderpods

Procedure

GSM Module

A GSM module or a GPRS module is a chip or circuit that will be used to establish communication between a mobile device or a computing machine and a GSM or GPRS system.

DHT 11 Moisture Sensor

The humidity sensing component of the DHT11 is a moisture holding substrate with the electrodes applied to the surface. … The DHT11 converts the resistance measurement to relative humidity on a chip mounted to the back of the unit and transmits the humidity and temperature readings directly to the Raspberry Pi.

Relay 5V

A relay is an electromagnetic switch operated by a relatively small electric current that can turn on or off a much larger electric current.

Connection Diagram

Get in Touch with Leaderpods

Get in Touch with Leaderpods

Social media & sharing icons powered by UltimatelySocial
Facebook
Twitter
YouTube
LinkedIn
Instagram